MATERIAL SAFETY DATA SHEET
Essentially Similar to
Revised 01/20/12
SECTION I-Product Information
Manufacturer: A.V.W.
Inc.
24 Hour Emergency
Phone Number: 800-424-9300
Product Name: 32 oz Spray Bottle Cleaner/Degreaser
SECTION II-Hazardous Ingredients
2 Butoxethanol CAS # 111-76-2 TWA 25
Isopropyl Alcohol CAS# 6763-0 TWA 400
Boiling Point: 100C
Specific Gravity: (H2O=1)=1
Vapor Pressure: (mm Hg): n/a
Solubility in Water: 100 %
Appearance: Colorless liquid with nice odor
Flash Point: 0 C
Extinguishing Media: Water, CO2, Foam, Dry chemical
Special Fire Fighting Procedures: Do not expose containers to temperatures above 120 F.
Unusual Fire & Explosion: Forms flammable vapor air mixtures. Lower temperatures increase the difficulty of getting it to ignite.
Time Weighted Average (TWA): 25 ppm based in raw material. This product is blended with water between 70-80%
Carcinogen: No
Acute Chronic Health Effects: Excessive exposure may cause irritation to upper respiratory tract. Excessive exposure may cause carboxyhemoglobinemia, thereby impairing the bloods ability to transport oxygen.
Primary Entry Routes: X Inhalation X Skin X Ingestion
Effects of Overexposure: Eyes- may cause pain, moderate eye irritation and slight corneal injury. Vapors may irritate eyes.
Skin- May cause irritation. Repeated contact may cause drying or flaking of skin.
Inhalation- In confined or poorly ventilated areas, vapors can readily accumulate and cause unconsciousness and death.
Ingestion- May be harmful.
First Aid:
Eyes: Flush with water for 15 minutes. Get immediate medical attention if irritant persist.
Skin: Wash with soap and water.
Ingestion: Do not induce vomiting. Get medical attention.
Inhalation: Move to fresh air. Get medical attention.
Stability: Stable
Conditions to Avoid: Hydrolysis producing small amounts of hydrochloric acid possible with gross water contamination. Avoid open flames, welding arcs, or other high temperature sources which induce thermal decomposition.
Incompatibility: Strong oxidizers; caustics, chemically active metals such as aluminum, magnesium and sodium.
Steps to take in case material is released or spilled: Use absorbent material and trash receptacle. Waste disposal method Federal and local regulations.
Respiratory Protection: Adequate ventilation
Gloves (type): Chemical resistant
Eye Protection: Glasses (if required)
Other Protective Equipment: None
Precautions to be taken in handeling and storing read and follow all label directions.