MATERIAL SAFETY DATA SHEET

Essentially Similar to U.S. Department of Labor Form OSHA

Revised 01/20/12

 

 

1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY

Manufacturer Name: A.V.W. Inc.

24 Hour Emergency Phone Number: 800-424-9300

Product Name: Fabric Freshener

Product Manufacturer: A.V.W. Inc.

Address: 441 South State Rd 7 Ste 4

Margate, FL 33068

Phone: 954-972-3338

General Description: A proprietary blend of ethyl alcohol, Benzalkonium chloride..

2. OSHA HAZARDOUS COMPONENTS

 

CAS Number Component Name

64-17-5   Ethyl alcohol

8001-54-5 N-Alkyl(C14 50%, C12 40%, C16 10%)Benzalkonium Chloride

 

3. EFFECTS OF OVEREXPOSURE

 

Eye Contact: May cause eye irritation.

Skin Contact: Skin contact may cause irritation to sensitive skin. 

Inhalation: Not applicable.

Ingestion: Swallowing may cause irritation of mouth and throat.  May cause upset stomach, nausea.

Carcinogenicity: Not listed as a carcinogen by NTP, IARC, OSHA or ACGIH.

 

4. FIRST AID MEASURES

 

Eye Contact: Flush eyes thoroughly with water for 15 minutes. If condition worsens or irritation persists, contact physician.

Skin Contact: In case of skin irritation occur, wash with soap and water and discontinue use.

Inhalation: Not applicable.

Ingestion: Do not induce vomiting, unless told to do so by a Poison Control Center or doctor. Contact a physician or Poison Control Center. Do not give anything by mouth to an unconscious person.

 

5. FIRE FIGHTING MEASURES

None flammable liquid

6. ACCIDENTAL RELEASE MEASURES

 

Absorb onto inert material and dispose in appropriate manner. Water clean up and rinse.

 

Steps To Be Taken in Case Material is Released or Spilled: Use water spray to dilute and/or wash away spills.

CAUTION. WILL CAUSE SLIPPERY SURFACES.

 

7. HANDLING AND STORAGE

Keep away from fire or flame. Store at normal room temperature away from reach of small children. Keep containers sealed. Use older containers first. Avoid freezing conditions.

 

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Eye Protection: None required under normal conditions.

Skin Protection: None required under normal conditions.

Respiratory Protection: None required under normal conditions.

Ventilation: None required under normal conditions.

Protective Equipment or Clothing: None required under normal conditions.

 

9. PHYSICAL AND CHEMICAL PROPERTIES

 

Physical Form: liquid

Color: clear

Odor: fresh fragrance

Specific Gravity @ 25C: 0.99

Freezing/Melting Point: not determined.

Boiling Point: not determined

Vapor Pressure @ 25C: N/A.

Vapor Density: N/A.

Solubility in Water: NO

pH: 4.5-8.0.

VOC % <6%

 

10. STABILITY AND REACTIVITY

Chemical Stability: Stable.

Conditions to Avoid: Open flame, high temperature

Materials to Avoid: Dust, prolonged contact with metallic or organic materials.

 

11. TOXICOLOGICAL INFORMATION

Prolonged skin contact may aggravate dermatitis in sensitive individuals. No toxic manifestation known through eyes contact or inhalation.

 

12. ECOLOGICAL INFORMATION

Environmental Fate and Distribution

Complete information is not yet available.

Environmental Effects

Complete information is not yet available.

Fate and Effects in Waste Water Treatment Plants

Complete information is not yet available.

 

13. DISPOSAL CONSIDERATIONS

RCRA Hazard Class (40 CFR 261)

When a decision is made to discard this material, as received, is it classified as a hazardous waste? No

 

14. TRANSPORT INFORMATION

Hazardous by transport regulations. When transported by Ground and Rail, this product typically is shipped as Consumer Commodity ORM-D. When transported by air, this product is typically shipped as Consumer Commodity or Alcohols N.O.S. depending on package size. When transported by ocean, this product is typically shipped as Limited Quantities. Refer to current regulations for exact requirements.

 

15. REGULATORY INFORMATION

N/A

16. OTHER INFORMATION

These data are offered in good faith as typical values and not as product specifications. No warranty, either expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable. However, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate.