MATERIAL SAFETY DATA SHEET
Essentially
Similar to
Revised:
01/20/2012
HMIS Health-1
Flammibility-4 Reactivity 1
SECTION I-Product
Information
Manufacturer Name: A.V.W. Inc.
24 Hour Emergency Phone Number: 800-424-9300
Product Name: Silicone Lubricant 7%
n-Hexane CAS# 11054-8 TWA 50 % 40-60
Acetone CAS# 67-64-1 TWA 1000 15-25
Propane CAS# 74-98-6 TWA 1000 5-20
Butane CAS# 106-97-8 TWA 800 5-20
Boiling Point: 182 F
Specific Gravity: (H2O=1)=0.65
Water Solubility: 0%
Appearance: Colorless liquid with penetrating ether-like odor
Flash Point: 18 F Extremely Flammable Level 3 Aerosol
Extinguishing Media: Water , Carbon Dioxide, and Foam, Dry chemical
Special Fire Fighting Procedures: Do not expose containers to Temps above 120F.
Unusual Fire and Explosion: Forms Flammable vapor-air mixtures. Lower temperatures increase the difficulty of getting it to ignite.
Time Weighed average(TWA): 50 ppm based in the raw material
Carcinogen: No
Chronic Effects: Excessive exposure may cause irritation to upper respiratory tract. Excessive exposure may cause carboxyhemoglobinemia. They’re by impairing the bloods ability to transport oxygen
Primary Routes of Entry X Inhalation X Skin X Ingestion
Effects of Overexposure: Eyes- May cause pain, moderate eye irritation and corneal injury. Vapors may irritate eyes.
Skin- May cause irritation Repeated contact may cause drying or flaking of skin.
Inhalation-In confined or poorly ventilated areas, vapors can readily accumulated and cause unconsciousness and death.
Ingestion: May be harmful,
First Aid:
Eyes- Flush with water for 15 minutes. If irritation persists, get medical attention.
Inhalation- Move to fresh air. Get medical attention.
Ingestion- Do not induce vomiting. Get immediate medical attention.
Stability: Stable X
Conditions to Avoid: Hydrolysis producing small amounts of Hydrochloric acid possible with gross water contamination
Avoid open flames welding arcs, or other high temperature sources which induce thermal decomposition
Incompatibility: Strong Oxidizers; Caustics, chemically active metals such as aluminum. magnesium & sodium
Steps to take in case material is released or spilled: Use absorbent material and trash receptacle. Waste disposal methods Federal and Local regulations
Respiratory Protection: Adequent ventilation.
Protective Gloves(type): Chemical resistant
Eye Protection: Glasses if required
Other Protective Equipment: None.
Precautions to be taken in handling and storing: Read and follow all label directions. Do not store containers at temperatures above 120 F.